re m1122 help

[pilot]

Many thanks to all that have replied,I have tried all the well known avenues
to access this router-using the default passwords(admin Telecom etc)
Zba2Y7Pr3..etc,trouble is there a password that is needed straight after the
type 'm' (fast) followed by 'o' (in 10 sec) to enter monitor,then if you let
that go to the next stage: Nokia Inc. (C) 1999-2001
Nokia Mrouter

rel-Gx1x2230.R04 built on Dec 7 2001 @ 14:23:47 by krol

login-id:(

I still need a username/password to get into the router which is unknown???
Any further help would be appreciated
Many Thanks........Pilot

--
This message is part of the NZ ADSL mailing list.
see http://unixathome.org/adsl/ for archives, FAQ,
and various documents.
To unsubscribe: send mail to ***@lists.unixathome.org
with "unsubscribe adsl" in the body of the message

[Steve Phillips]

Post by pilot
Many thanks to all that have replied,I have tried all the well known avenues
to access this router-using the default passwords(admin Telecom etc)
Zba2Y7Pr3..etc,trouble is there a password that is needed straight after the
type 'm' (fast) followed by 'o' (in 10 sec) to enter monitor,then if you let
that go to the next stage: Nokia Inc. (C) 1999-2001
Nokia Mrouter
login-id:(
I still need a username/password to get into the router which is unknown???
Any further help would be appreciated
Many Thanks........Pilot

Try "password" - this worked for me on one such modem, however, I
believe most of the modems that have a password set here were not the
"general consumer" modems but rather the modems used for the "private
office" system and are actually still Telecom assets.

The only way to fix these modems is to throw them away and buy a new one.

(this was the bit that had nokia stumped as well when they were called
in to try and reset these passwords)

[Sean Ramsay]

Try admin as the login and password, all the telecom sold adsl
routers/modems i've encountered have had this set by default.

If you can login to the web interface you should be able to display the
config with logins and passwords in plain text

Post by Steve Phillips

Post by pilot
Many thanks to all that have replied,I have tried all the well known
avenues to access this router-using the default passwords(admin
Telecom etc)
Zba2Y7Pr3..etc,trouble is there a password that is needed straight
after the type 'm' (fast) followed by 'o' (in 10 sec) to enter
monitor,then if you let that go to the next stage: Nokia Inc. (C)
1999-2001
Nokia Mrouter
login-id:(
I still need a username/password to get into the router which is unknown???
Any further help would be appreciated
Many Thanks........Pilot

Try "password" - this worked for me on one such modem, however, I
believe most of the modems that have a password set here were not the
"general consumer" modems but rather the modems used for the "private
office" system and are actually still Telecom assets.
The only way to fix these modems is to throw them away and buy a new one.
(this was the bit that had nokia stumped as well when they were called
in to try and reset these passwords)

--
This message is part of the NZ ADSL mailing list.
see http://unixathome.org/adsl/ for archives, FAQ,
and various documents.
To unsubscribe: send mail to ***@lists.unixathome.org
with "unsubscribe adsl" in the body of the message